LED panels

LED panels, lighting solutions commensurate with your project

The LED panels diffuse light without shadows. Each LED light panel uniformly lights up the living room from the ceiling. But it still has other interests for professionals. You can select neutral lighting to enhance the products in your store or create an atmosphere favorable to work in your offices. LED panels offer several options. Buying an LED slab therefore involves determining its use. here is a Presentation of the characteristics of the different models of LED panels Available and their installation methods to choose the best LED slab according to your lighting project.

LED panel: very economical and efficient store lighting

From main advantages of the ceiling LED panel, you benefit from a low purchase and installation cost for effective lighting. The energy performance of the LED slab also contributes to the economy achieved in terms of your budget store lighting or for office. Many stores are already using ceiling light tiles for their immediate profitability. Buying an LED panel is advantageous due to its 120 ° lighting angle and its light intensity: depending on the surface to be covered, a single LED light pavement is enough to properly light up the sales area. The LED panels are also controlled by lot, if it is a question of arranging several shelves. The installation kit limits additional expenses when buying a LED slab. All parts are provided for quick and without delay installation.

In the long term, the LED slab guarantees a low cost cost, mainly thanks to reduced electrical consumption. LED technology ensures exponential power without overconsumption. The principle of electroluminescence allows efficient lighting but does not require an electrical supply as significant as the halogen lamp. The LED panel then restores a high light intensity, since you get lighting equivalent to around 3,400 lumens from only 40W. In addition, its lifespan is much greater than that of an incandescent bulb. The low investment to buy an LED panel is quickly amortized. The electricity bill is reduced to its minimum. However, even if the cheap LED panel provides an economical lighting solution, you cannot be satisfied with any model. You have an interest in Select the best LED slab for your work environment From the different criteria of choice.

How to choose my LED panel on the Silumen.com online catalog?

Buy an LED panel invites you to take stock of the needs in lighting. The best LED slab corresponds to the use of the sought -after brightness, the lighting surface and with the chosen design. Each project requires a solution specific to the context of use. You must specify yours. here are the Criteria for choosing the appropriate LED slab to your project.

Dimensions and shapes of the LED slab for ceiling

Among the selection of cheap LED slabs, you have the choice between two dimensions for each form, namely the square LED slab and the rectangular LED pavement. For each design, the visual size is almost zero because of its fine structure and its height installation. THE LED panel for rectangular ceiling Lie the diffusion area of ​​the lighting compared to the square which concentrates the light flow on a delimited space. For equivalent lighting power, the light emitted does not have the same radiation. The two LED light pavers have a width of 30cm to adapt to the corridors of the establishments. The length varies from single to double since it measures 60 or 120cm. You have understood, so you have the choice between 60x30 LED panels and 120x30 LED tiles. In an open space, it is therefore easy to create work islands or bring together teams around a LED panel on the ceiling.

The square LED slab is ideal above a counter or a box. It exists in two dimensions: the 30x30 LED slab and the 60x60 cm LED panel. A configuration of several LED pavers enlarges the sharing or conviviality spaces while a succession of square LED slabs, installed at regular intervals, structure and modernize them. The design of the ceiling LED panels therefore influences the atmosphere of the lit area. But it is also possible to play on the color of LEDs to welcome and attract customers or energize the work teams.

The lighting color of the light slab

The temperature expressed in Kelvin determines the lighting color LED slabs. You have the choice between different shades of white, with a palette of colors that spreads from yellow light to slightly bluish light. Depending on the desired type of brightness, you must choose an appropriate color temperature at your professional premises or your interior. For a natural light, it is better to turn to a neutral white which does not modify the colors of the objects, nor the contrasts. The different color variations are between 4,200 and 5,500 K. A warmer white is quite possible, located between 2,300 and 3,500 K. It creates a warm atmosphere. On the other hand if you are looking for a very clear LED light slab, such as for a passage area, favor a cold white, close to blue. This lighting color has the advantage of providing a strong light intensity. It is mainly suitable for laboratory type workspaces, and promotes concentration. However, there would be no need to worry about the safety of the installation of a LED light panel because no heat is produced. Even an inexpensive LED slab does not work like a classic bulb. The installation of a light slab on the ceiling is simple and quick to make.

How to install a LED panel on the ceiling?

You have the possibility of fix your LED light panel in three different ways: protruding, suspended or embedded in a false ceiling. All our models are compatible with each fixing mode. To do this, Silumen offers you different LED panel fixing kits. If the materials do not allow you to receive your LED pavement in the ceiling, just install an assembly medium or order a LED slab suspension kit. If you suspend your LED panel with mounting cables, you lower the lighting height and change the visual space configuration. This type of installation with apparent cables is particularly suitable for parts with a high ceiling. It invites technology to your decor without invading it. The light slab is then directly powered from the ceiling and requires only a safety protocol. As in any connection, you should make sure that the electric current no longer circulates in the wires to be connected. For the connection of a protruding installation, it is advisable to follow the instructions of the assembly instructions so as not to have to start again.

The installation and connection of a protruding LED panel

When the LED light slab is installed on an assembly medium, it is a protruding installation. But the block does not exceed 5cm thick and remains faithful to the proportions of the LED pavement. With this type of installation, you do not need to cut the false ceiling to insert the lighting: just screw the protruding kit. You must also start with this step. Remember to leave an open side to facilitate the insertion of the lamp. Once the LED panel is in place, put the transformer on it and unscrew its hood. You can then connect the transformer cables with the supply of the sector, obviously cut off during connection. The hood given, you proceed to Connection of the transformer and the LED panel. This operation is completed, all you have to do is screw the last side. If the false ceiling already hosted a built -in light, it is better to reuse the opening.

The installation and connection of an LED panel embedded in a false ceiling

For'embedding a LED slab, the approach is not always so immediate. Admittedly, it is possible to use the old location of the previous lamp, but it must be checked beforehand that the dimensions agree. If this is not the case or if the ceiling has not yet been pierced, you will have to make a hole. It is advisable to use a template to open up to the right dimensions. Silumen also offers you a LED Panel Kit. Make sure that the chosen location does not coincide with the ceiling rails. The materials of a false ceiling have no resistance to cutting. Take the time to check the precision of the square or rectangle before you start the assembly itself. For successfully install an LED panel in a false ceiling, you must start with the connection part. Once the connection is made, you just have to place the light slab in the false ceiling. The fixing brackets installed at the rear facilitate the screwing of the lighting, and contribute to the safety of the installation. Regarding the connection, the transformer must be connected to the power cable before connecting it to the LED slab. To facilitate manipulations, the transformer hood unscrews and gets away. You find complete mounting kits to install it without delay. You just have to define the exact location of your LED lighting on the ceiling.

Where to install a LED pavement?

The ceiling LED panel finds its place above an activity zone to offer optimal visibility, but it can also be used as a room lighting. With its aluminum frame and its plexiglass diffuser, it guarantees multifunction LED lighting. His discretion and sleek design place him at the top of professional lighting solutions. Buying an LED slab allows different uses. The cheap LED panel often occupies a strategic place on places of sale. It is also useful in buildings and businesses.

LED panel, a lighting solution for shops and stores

The LED slab highlights the rays and products offered for sale. The best LED panel sublimates colors or highlights those that are trendy. If you opt for a neutral lighting color, you display your transparency towards your customers. You can also target your customers with a particular brightness. This type of lighting is particularly suitable for shops, but it is also suitable for buildings in buildings.

The LED slab, reliable lighting in the common areas of the buildings

The LED light panel can perfectly serve as lighting in a reception hall. It gives solemnity to the entries of buildings in bluish white mode. Above all, it guarantees sufficient lighting for late feedback. In the hallway of the hotels, a warmer brightness contributes to the conviviality of the premises. The best LED sign thus sheds light on the passage of residents or travelers. But it also meets lighting standards for offices.

The ceiling LED panel, daily office equipment on a daily basis

The LED panel provides powerful lighting to work in the best conditions. It can be installed in laboratories where the precision of gestures and results are required. The best LED panel meets concentration requirements during working time, without adding visual fatigue. In an individual, he rather has decorative use.

The light slab, a trendy decoration for a contemporary interior

The modernity of its clean lines releases visual space and participates in the contemporary style of the decor. Your lighting project has the size you want. Its brightness creates a personalized atmosphere in the living room. A square model allows Set up a light path with a batch of LED panels.