Wall washers / LED MORS

Guide to choice and installation of a LED-Mur Booking

A LED Wall Lick is a very powerful outdoor projector, generally used to create light effects on monuments. Installed at the foot of a wall, it diffuses a grazing light which brings out the reliefs and the volumes. Here are our Buying tips for a LED-Dommement for your exterior.

The LED-Mur Lick: very efficient and resistant external lighting

The Wall Washer, or a background, allows you to create an original lighting in a garden or in a public place. Installed at the foot of a wall, this exterior lighting highlights the roughness and reliefs of the surface. This very powerful exterior lighting is often used in tourist areas, in public parks or on the outskirts of historic sites to highlight the building in an original way. It creates a breathtaking effect, so that the building is the star of the place after nightfall. This type of enhancement can however be implemented in individuals, for example to light up a pretty visible stone wall on an old house. Designed for outdoor professional use, LED mothers are also economical and very resistant.

What is the function of a Wall Washer?

A Wall Washer is an outdoor luminaire designed to diffuse a grazing light on its support. Generally established at the foot of an external wall, and sometimes embedded in the floor, they are oriented towards the top of the wall. Very close to the support it lights up, the Wall Washer diffuses the light flow almost in parallel to it. The light then shaves the surface of the wall and highlights each detail and each relief. This is why these luminaires are also called "mothers".

This particular light flow makes it possible to bring out the volumes of the wall, and the peculiarities of the masonry. They are very useful for highlighting a pretty visible stone wall, or remarkable masonry. They are thus often used for the embellishment of ancient monuments and historical buildings. It is also possible toBuy a LED-Dommement Lick for the general lighting of a professional building, like a warehouse, a parking lot or a storage area. Although very efficient, Wall Washers are very energy efficient, thanks to LED technology. They can therefore be used for lighting monuments over long periods, without excessive electricity consumption.

How to choose my-burning lick on Silumen.com?

To be sure of Choose the best LED-Mur Lick from the many models available, Start by comparing some of their main characteristics.

The power of the background

Outdoor mothers are available in several powers, to adapt to all buildings. Indeed, the Best LED mothers of 150 or 220W could be too powerful for private use or for a small building, and could be dazzling. THE LED-MU 150W Lick and the 200W outdoor background must therefore be reserved for professional use, or highlighting imposing buildings. Small cheaper mothers of 18 or 36W are sufficient for the lighting of the walls of a house or a small building. THE LED-MUR LICK 18W and the Wall Washer 36w Sign up enough to enhance the support, without however being dazzling. For most uses, you can be satisfied with an average power model: a LED-MU 50 or 100W lick is fairly powerful to properly illuminate most buildings.

The protection index of a background outside

LED mothers are designed for external use they naturally benefit from a protection sign which testifies to their sealing. The Wall Washer IP65 is waterproof for dust penetration. This is an important criterion for these exterior lights perpetually oriented upwards. It is also resistant against throwing water jets. THE Wall Washer IP67 It is also tightly tight, but also resists a temporary immersion, which can be useful in certain configurations.

The color of the LED-Mur Lick

The outdoor Washers are available in black colors. This sober shade agrees with all the sets, and is suitable for professional use.

The length of the Wall Washer

The LEDs are encrusted over the entire length of the background to diffuse light homogeneously. Most cheap LED mothers measure one meter. The 1m LED-MUR lick is suitable for most uses.

Lighting color

Outdoor mothers produce white light, which is suitable for all uses, professional or private. This lighting color sober allows the wall to be highlighted in all discretion.

How to set a LED-Mur Lick?

Installing a LED or Wall Washer-Wall Lick is very simple. You just need to fix it securely in the ground and connect it directly to an outdoor electrical arrival. No specific tools is necessary, unless you want to start a more sought -after installation, for example in height or protected by grids or windows. Conversely, it is also possible to Set a cheap LED-LEM Lick at the top of the wall. The light flow will then operate in the opposite direction, and shave the wall from top to bottom. In a place open to the public, favor an installation of LED-MUR lick sheltered from visitors, for security issues.

Where to install a background outside?

Your LED-MUR-Schery naturally finds its place at the foot of a monument, to highlight the roughness of the materials and the reliefs of the structure. They are also used for public events, and to illuminate the historic monuments of the city from below, without dazzling visitors. The most beautiful buildings are thus highlighted and seem in relief in the dark. To create this kind of room lighting in a private property, you can also Buy a LED-Mur Booking to install it at the foot of a speaker wall, in order to subtly illuminate the garden. On the old buildings, an apparent stone wall can be elegantly highlighted by a murs. It is also an interesting way to provide indirect lighting on a terrace or in a courtyard.