IP44 solar LED projector with detector and panel

Outdoor projector 'motion detector' Solar panel 'IP44

You are looking for an economical lighting solution capable of lighting and securing your exterior '' Siluma has what you need. We advise you to opt for this LED projector of 10W and IP44 certified. It has a solar panel which feeds it, and a movement detector. Order now on Silumen and enjoy all the advantages of Solar projectors with a motion detector.

The characteristics of the solar LED projector with Silumen panel and detector

Light up and secure its outdoor spaces

If you want to install a luminaire in your courtyard, remember to opt for a versatile lighting solution that can also improve the safety of your outdoor spaces. With this in mind, we invite you to buy this Silumi outdoor LED projector with a panel and a detector.

By installing it at a height of 2.5 m on a wall, it offers you a cold white lighting (5000 k) of light intensity of 800 lumens, diffusing according to an angle of 90 °.

A projector that works with solar energy

This projector is ideal for shedding light on the areas in which the supply in the mains is difficult to access. It has an integrated rechargeable battery which recharges thanks to thesolar energy.

A photovoltaic panel is provided With this solar outdoor projector. Thanks to its type of power supply, you can enjoy quality external lighting without climbing your electricity bill.

Provided with a motion detector

In order to secure your courtyard, a motion detector is located on the battery compartment below the LED projector. Its sweeping angle is 90 ° horizontally, with a range of 6 meters.

By installing this projector, remember to orient the sensor above the average height of an animal in order to avoid the trigger of the light by the latter.

Durable and resistant external lighting

Benefit from Advantages of LED lighting By opting for this outdoor projector. Thanks to its duration reaching 20,000 hours of use, enjoy your outdoor lighting for several years.

This projector is IP44 certified, guaranteeing the possibility of installing it outdoors. It is strongly advised to put it in a sheltered location to enjoy its maximum longevity.

Installation of the solar projector with motion detector

• 1 - Choose the location of your projector and mark the position of the screw holes.
• 2 - Pour the screw holes and mount the projector using two screws or bolts.
• 3 - Install the solar panel assembly base using the screws provided.
• 4 - Place the panel in it, adjusting its position so that it receives the most sunlight.
• 5 - Pass the panel cable to the lamp and connect it.
• 6 - Adjust the light sensor direction as a function of the desired detection zone.
• 7 - Light the solar lamp by pressing the ON/OFF button.

Caractéristique	Valeur
Puissance	10W
Lumens/W	80 did not/and
Dimmable	Non
Fréquence	50-60
Intensité du courant	3,13 Ah
Rendu des couleurs IRC	Ra 80
Angle d'éclairage	90°
Indice de Protection	IP 44
Solaire	Oui
Autonomie	1 h
Classe énergétique	G
Température de fonctionnement	-20 ° C to +50 ° C
Temps de charge	7 to 8 h
Tension	3,2 and
Type de courant	DC
Type de détecteur	Movement
Temps de détection	< 200ms
Couleur	Noir
Dimensions	135 x 95 mm
Largeur	95 mm
Longueur	135 mm
Forme du luminaire	Rectangle
Certifications	What & Rohs
Garantie	2 ans
Batterie li-ion	2000 mAh
Orientable	Oui
Luminosité	800 lm
Portée totale	6 m
Détecteur	Included
Détecteur de mouvement	Oui
Durée de vie	~25 000h
Fonction	Solar captor

Notice d'installation

Vous souhaitez plus d'informations sur le produit ? Contactez notre service client à contact@silumen.com